ATM-9.5 (emergency technical vehicle) is designed for maintenance and repair of contact networks of trams and trolleybuses, as well as other work at a height of up to 9.5 m. Provides transportation of a team of electricians with the necessary materials, parts and tools, as well as carrying out installation, preventive and repair work of contact networks using a working platform. The lift allows movement within the site of work with people on a raised working platform to a height of up to 5 meters to audit the contact network at a speed of up to 5 km/h. The lift is designed for movement on public roads in conditions of heavy traffic and tram tracks with an open rail-sleeper grid, as well as under bridges, overpasses and in tunnels.
DESIGN FEATURES OF THE LIFT
• four hydraulic outriggers
• cargo compartments for transporting materials
• pneumatic line to the working platform for the drive of a pneumatic tool or spray gun*
• additional autonomous pump for emergency lowering of the working platform and bringing the machine into the transport position
• remote control of lifting – lowering and transverse movement of the working platform
• hydro-mechanical locking system for spontaneous lowering of the working platform
• limit load limiter
• support position monitoring system
• electronic signal roll meter
• automatic device for blocking the lifting of the working platform above the set value for movement with people on the raised platform
• automatic locking device for horizontal movement of the working platform when outriggers are not exposed
• possibility of installing rail running equipment*
EQUIPMENT OF THE VAN BODY
• workbench with a pedestal*
• locksmith vise*
• tool storage rack*
• tool cabinet*
MAIN FEATURES
Basic chassis
GAZ–C42R33
Maximum lifting capacity of the scissor lift cradle, kg
500
Maximum carrying capacity of the cradle, kg
500
Cradle area, m2
5,5±0,1
The maximum number of people in the cradle, people
6
The maximum permissible manual force (when lifting two people), N
400
Working lifting height not less than, m
9+0,5
External dimensions of the body-kung (length, width, height), mm
1800х2400х2000
Number of seats in the cab/body-kung
7/-
Lateral extension of the working platform, m
1,2+0,1
Base, mm, no more
4515*
Minimum turning radius, m
7,8*
Maximum transport speed of movement, km/h
70*
Reference contour, mm, not less
2870х2120
Maximum reaction of the support to the ground, kN
70
Coefficient of static stability
1,2
Management method
Electrohydraulic
Hydraulic system pressure, MPa:
- nominal
- maximum
16
20
Method of current supply to ATM
From the electrical equipment of the base chassis
Full curb weight ATM, kg, no more
8700
Distribution of the total weight of the ATM in the transport
position along the axes, kg, no more:
- to the front
- to the back
2650
6600
Weight of lifting equipment, kg, no more
4000
Overall dimensions of the ATM in the transport position, not more than, m. (length x width x height)
7,935x2.4x3.31
*- in agreement with the customer
Cargo altitude characteristics
